|
|
 |
 |
 |
| Information you need
to know before using the difference file (Essential reading) |
|
|
|
| •About
the Control Configurator ET Ver.1.01 difference file |
|
|
|
| The Control Configurator ET Ver.1.01 difference
file is used to upgrade Control Configurator ET Ver.1.00 to Control
Ver.1.01. This file does not work on its own. |
| - |
To install this software, Control Configurator
ET Ver.1.00 must already be installed. |
| •Changes
in Control Configurator ET Ver.1.01 |
|
|
|
| The following points have been upgraded in Control
Configurator ET Ver.1.01. |
| 1. |
The installation folder was changed in '\Program Files\Panasonic MEW Control\Configurator'
and the group menu was changed to '\Panasonic MEW Control\Configurator'. |
|
| •System
requirements |
|
|
|
| Make sure that the computer on which you intend
to run the software meets the minimum specifications listed below. |
| OS |
Windows 95 (OSR2) / 98 / Me / NT (Ver.4.0 or later) / 2000 / XP |
| Available
hard disk space |
More than 10 MB |
| Recommended
CPU |
Pentium 100 MHz or better |
| Recommended
system RAM |
More than 32 MB (depends on OS) |
| Recommended
display resolution |
800*600 or more |
| Recommended
color depth |
High color (16 bits) or better |
| Applicable
Units |
ET-LAN Unit Ver.2.0 or later |
|
|
|
| How to install the
difference file |
|
|
|
*Request regarding
downloads:
If downloading does not proceed properly, please select "Mirror server" from the above pulldown menu
and then press the download button again. This enables you to download the same file from a different server.
Please use Internet Explorer when downloading software. With Netscape Navigator, downloading may not work properly.
If you are having a trouble when downloading, please contact our NAIS FAN customer support system. |
| 2. |
Indicate the download destination.
As prompted, indicate the download destination for configet_spv101e.exe.
When you have indicated the download destination, click on the
download button. The download will begin. |
| 3. |
When the download is finished,
double -click the configet_spv101e.exe file to begin the installation
process.
Follow the screen prompts displayed by the installation program.
| - |
During installation, be
sure to read the License Agreement. Users who continue
with the installation are regarded as assenting to the
conditions of use in the License Agreement. |
| - |
Input the license numbers
written in the user registration card which is included
in the package. |
|
| 4. |
After completing the installation,
reboot the computer. |
| - |
To install this software, Control
Configurator ET Ver.1.00 must already be installed. |
|
|
|
| |
